Viewing file:  ipv6.h (3.53 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
#ifndef _IPV6_H
#define _IPV6_H
#include <linux/in6.h>
#include <asm/byteorder.h>
/* The latest drafts declared increase in minimal mtu up to 1280. */
#define IPV6_MIN_MTU 1280
/*
* Advanced API
* source interface/address selection, source routing, etc...
* *under construction*
*/
struct in6_pktinfo {
struct in6_addr ipi6_addr;
int ipi6_ifindex;
};
struct in6_ifreq {
struct in6_addr ifr6_addr;
__u32 ifr6_prefixlen;
int ifr6_ifindex;
};
#define IPV6_SRCRT_STRICT 0x01 /* Deprecated; will be removed */
#define IPV6_SRCRT_TYPE_0 0 /* Deprecated; will be removed */
#define IPV6_SRCRT_TYPE_2 2 /* IPv6 type 2 Routing Header */
/*
* routing header
*/
struct ipv6_rt_hdr {
__u8 nexthdr;
__u8 hdrlen;
__u8 type;
__u8 segments_left;
/*
* type specific data
* variable length field
*/
};
struct ipv6_opt_hdr {
__u8 nexthdr;
__u8 hdrlen;
/*
* TLV encoded option data follows.
*/
};
#define ipv6_destopt_hdr ipv6_opt_hdr
#define ipv6_hopopt_hdr ipv6_opt_hdr
/*
* routing header type 0 (used in cmsghdr struct)
*/
struct rt0_hdr {
struct ipv6_rt_hdr rt_hdr;
__u32 reserved;
struct in6_addr addr[0];
#define rt0_type rt_hdr.type
};
/*
* routing header type 2
*/
struct rt2_hdr {
struct ipv6_rt_hdr rt_hdr;
__u32 reserved;
struct in6_addr addr;
#define rt2_type rt_hdr.type
};
/*
* home address option in destination options header
*/
struct ipv6_destopt_hao {
__u8 type;
__u8 length;
struct in6_addr addr;
} __attribute__ ((__packed__));
/*
* IPv6 fixed header
*
* BEWARE, it is incorrect. The first 4 bits of flow_lbl
* are glued to priority now, forming "class".
*/
struct ipv6hdr {
#if defined(__LITTLE_ENDIAN_BITFIELD)
__u8 priority:4,
version:4;
#elif defined(__BIG_ENDIAN_BITFIELD)
__u8 version:4,
priority:4;
#else
#error "Please fix <asm/byteorder.h>"
#endif
__u8 flow_lbl[3];
__be16 payload_len;
__u8 nexthdr;
__u8 hop_limit;
struct in6_addr saddr;
struct in6_addr daddr;
};
/*
* This structure contains configuration options per IPv6 link.
*/
struct ipv6_devconf {
__s32 forwarding;
__s32 hop_limit;
__s32 mtu6;
__s32 accept_ra;
__s32 accept_redirects;
__s32 autoconf;
__s32 dad_transmits;
__s32 rtr_solicits;
__s32 rtr_solicit_interval;
__s32 rtr_solicit_delay;
__s32 force_mld_version;
#ifdef CONFIG_IPV6_PRIVACY
__s32 use_tempaddr;
__s32 temp_valid_lft;
__s32 temp_prefered_lft;
__s32 regen_max_retry;
__s32 max_desync_factor;
#endif
__s32 max_addresses;
__s32 accept_ra_defrtr;
__s32 accept_ra_pinfo;
#ifdef CONFIG_IPV6_ROUTER_PREF
__s32 accept_ra_rtr_pref;
__s32 rtr_probe_interval;
#ifdef CONFIG_IPV6_ROUTE_INFO
__s32 accept_ra_rt_info_max_plen;
#endif
#endif
__s32 proxy_ndp;
__s32 accept_source_route;
#ifdef CONFIG_IPV6_OPTIMISTIC_DAD
__s32 optimistic_dad;
#endif
void *sysctl;
};
/* index values for the variables in ipv6_devconf */
enum {
DEVCONF_FORWARDING = 0,
DEVCONF_HOPLIMIT,
DEVCONF_MTU6,
DEVCONF_ACCEPT_RA,
DEVCONF_ACCEPT_REDIRECTS,
DEVCONF_AUTOCONF,
DEVCONF_DAD_TRANSMITS,
DEVCONF_RTR_SOLICITS,
DEVCONF_RTR_SOLICIT_INTERVAL,
DEVCONF_RTR_SOLICIT_DELAY,
DEVCONF_USE_TEMPADDR,
DEVCONF_TEMP_VALID_LFT,
DEVCONF_TEMP_PREFERED_LFT,
DEVCONF_REGEN_MAX_RETRY,
DEVCONF_MAX_DESYNC_FACTOR,
DEVCONF_MAX_ADDRESSES,
DEVCONF_FORCE_MLD_VERSION,
DEVCONF_ACCEPT_RA_DEFRTR,
DEVCONF_ACCEPT_RA_PINFO,
DEVCONF_ACCEPT_RA_RTR_PREF,
DEVCONF_RTR_PROBE_INTERVAL,
DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN,
DEVCONF_PROXY_NDP,
DEVCONF_OPTIMISTIC_DAD,
DEVCONF_ACCEPT_SOURCE_ROUTE,
DEVCONF_MAX
};
#endif /* _IPV6_H */
|