Viewing file:  irqflags.h (6.16 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
* Copyright (C) 1996 by Paul M. Antoine
* Copyright (C) 1999 Silicon Graphics
* Copyright (C) 2000 MIPS Technologies, Inc.
*/
#ifndef _ASM_IRQFLAGS_H
#define _ASM_IRQFLAGS_H
#ifndef __ASSEMBLY__
#include <linux/compiler.h>
#include <asm/hazards.h>
__asm__(
" .macro raw_local_irq_enable \n"
" .set push \n"
" .set reorder \n"
" .set noat \n"
#ifdef CONFIG_MIPS_MT_SMTC
" mfc0 $1, $2, 1 # SMTC - clear TCStatus.IXMT \n"
" ori $1, 0x400 \n"
" xori $1, 0x400 \n"
" mtc0 $1, $2, 1 \n"
#elif defined(CONFIG_CPU_MIPSR2)
" ei \n"
#else
" mfc0 $1,$12 \n"
" ori $1,0x1f \n"
" xori $1,0x1e \n"
" mtc0 $1,$12 \n"
#endif
" irq_enable_hazard \n"
" .set pop \n"
" .endm");
static inline void raw_local_irq_enable(void)
{
__asm__ __volatile__(
"raw_local_irq_enable"
: /* no outputs */
: /* no inputs */
: "memory");
}
/*
* For cli() we have to insert nops to make sure that the new value
* has actually arrived in the status register before the end of this
* macro.
* R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
* no nops at all.
*/
/*
* For TX49, operating only IE bit is not enough.
*
* If mfc0 $12 follows store and the mfc0 is last instruction of a
* page and fetching the next instruction causes TLB miss, the result
* of the mfc0 might wrongly contain EXL bit.
*
* ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
*
* Workaround: mask EXL bit of the result or place a nop before mfc0.
*/
__asm__(
" .macro raw_local_irq_disable\n"
" .set push \n"
" .set noat \n"
#ifdef CONFIG_MIPS_MT_SMTC
" mfc0 $1, $2, 1 \n"
" ori $1, 0x400 \n"
" .set noreorder \n"
" mtc0 $1, $2, 1 \n"
#elif defined(CONFIG_CPU_MIPSR2)
" di \n"
#else
" mfc0 $1,$12 \n"
" ori $1,0x1f \n"
" xori $1,0x1f \n"
" .set noreorder \n"
" mtc0 $1,$12 \n"
#endif
" irq_disable_hazard \n"
" .set pop \n"
" .endm \n");
static inline void raw_local_irq_disable(void)
{
__asm__ __volatile__(
"raw_local_irq_disable"
: /* no outputs */
: /* no inputs */
: "memory");
}
__asm__(
" .macro raw_local_save_flags flags \n"
" .set push \n"
" .set reorder \n"
#ifdef CONFIG_MIPS_MT_SMTC
" mfc0 \\flags, $2, 1 \n"
#else
" mfc0 \\flags, $12 \n"
#endif
" .set pop \n"
" .endm \n");
#define raw_local_save_flags(x) \
__asm__ __volatile__( \
"raw_local_save_flags %0" \
: "=r" (x))
__asm__(
" .macro raw_local_irq_save result \n"
" .set push \n"
" .set reorder \n"
" .set noat \n"
#ifdef CONFIG_MIPS_MT_SMTC
" mfc0 \\result, $2, 1 \n"
" ori $1, \\result, 0x400 \n"
" .set noreorder \n"
" mtc0 $1, $2, 1 \n"
" andi \\result, \\result, 0x400 \n"
#elif defined(CONFIG_CPU_MIPSR2)
" di \\result \n"
" andi \\result, 1 \n"
#else
" mfc0 \\result, $12 \n"
" ori $1, \\result, 0x1f \n"
" xori $1, 0x1f \n"
" .set noreorder \n"
" mtc0 $1, $12 \n"
#endif
" irq_disable_hazard \n"
" .set pop \n"
" .endm \n");
#define raw_local_irq_save(x) \
__asm__ __volatile__( \
"raw_local_irq_save\t%0" \
: "=r" (x) \
: /* no inputs */ \
: "memory")
__asm__(
" .macro raw_local_irq_restore flags \n"
" .set push \n"
" .set noreorder \n"
" .set noat \n"
#ifdef CONFIG_MIPS_MT_SMTC
"mfc0 $1, $2, 1 \n"
"andi \\flags, 0x400 \n"
"ori $1, 0x400 \n"
"xori $1, 0x400 \n"
"or \\flags, $1 \n"
"mtc0 \\flags, $2, 1 \n"
#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
/*
* Slow, but doesn't suffer from a relativly unlikely race
* condition we're having since days 1.
*/
" beqz \\flags, 1f \n"
" di \n"
" ei \n"
"1: \n"
#elif defined(CONFIG_CPU_MIPSR2)
/*
* Fast, dangerous. Life is fun, life is good.
*/
" mfc0 $1, $12 \n"
" ins $1, \\flags, 0, 1 \n"
" mtc0 $1, $12 \n"
#else
" mfc0 $1, $12 \n"
" andi \\flags, 1 \n"
" ori $1, 0x1f \n"
" xori $1, 0x1f \n"
" or \\flags, $1 \n"
" mtc0 \\flags, $12 \n"
#endif
" irq_disable_hazard \n"
" .set pop \n"
" .endm \n");
extern void smtc_ipi_replay(void);
static inline void raw_local_irq_restore(unsigned long flags)
{
unsigned long __tmp1;
#ifdef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY
/*
* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY does prompt replay of deferred
* IPIs, at the cost of branch and call overhead on each
* local_irq_restore()
*/
if (unlikely(!(flags & 0x0400)))
smtc_ipi_replay();
#endif
__asm__ __volatile__(
"raw_local_irq_restore\t%0"
: "=r" (__tmp1)
: "0" (flags)
: "memory");
}
static inline int raw_irqs_disabled_flags(unsigned long flags)
{
#ifdef CONFIG_MIPS_MT_SMTC
/*
* SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
*/
return flags & 0x400;
#else
return !(flags & 1);
#endif
}
#endif
/*
* Do the CPU's IRQ-state tracing from assembly code.
*/
#ifdef CONFIG_TRACE_IRQFLAGS
/* Reload some registers clobbered by trace_hardirqs_on */
#ifdef CONFIG_64BIT
# define TRACE_IRQS_RELOAD_REGS \
LONG_L $11, PT_R11(sp); \
LONG_L $10, PT_R10(sp); \
LONG_L $9, PT_R9(sp); \
LONG_L $8, PT_R8(sp); \
LONG_L $7, PT_R7(sp); \
LONG_L $6, PT_R6(sp); \
LONG_L $5, PT_R5(sp); \
LONG_L $4, PT_R4(sp); \
LONG_L $2, PT_R2(sp)
#else
# define TRACE_IRQS_RELOAD_REGS \
LONG_L $7, PT_R7(sp); \
LONG_L $6, PT_R6(sp); \
LONG_L $5, PT_R5(sp); \
LONG_L $4, PT_R4(sp); \
LONG_L $2, PT_R2(sp)
#endif
# define TRACE_IRQS_ON \
CLI; /* make sure trace_hardirqs_on() is called in kernel level */ \
jal trace_hardirqs_on
# define TRACE_IRQS_ON_RELOAD \
TRACE_IRQS_ON; \
TRACE_IRQS_RELOAD_REGS
# define TRACE_IRQS_OFF \
jal trace_hardirqs_off
#else
# define TRACE_IRQS_ON
# define TRACE_IRQS_ON_RELOAD
# define TRACE_IRQS_OFF
#endif
#endif /* _ASM_IRQFLAGS_H */
|